The “Establishing DBI” project, funded by the R consortium, started about a year ago. It includes the completion of two new backends, RPostgres and RMariaDB, and a quite a few interface extensions and specifications.
Learn more about DBI, R’s database interface, on https://r-dbi.org.
This blog post showcases only the visible changes, a substantial amount of work went into extending the DBI specification and making the three open-source database backends compliant to it. After describing the release of the two new backends RMariaDB and RPostgres, I’ll be discussing the following improvements:
I conclude with an outlook on things left to do.
The DBI specification has been formulated in the preceding R consortium project, “Improving DBI”. It is both an automated test suite and a human-readable description of behavior, implemented in the DBItest package. For this project, I extended this specification and could also use it to implement RPostgres and RMariaDB: for once, test-driven development was pure pleasure, because the tests were already there!
I took over maintenance of the RPostgres and RMariaDB packages, which are complete rewrites of the RPostgreSQL and RMySQL packages, respectively. These packages use C++ (with Rcpp) as glue between R and the native database libraries. A reimplementation and release under a different name has made it much easier to fully conform to the DBI specification: only listing temporary tables and casting to blob or character is not supported by RMariaDB (due to a limitation of the DBMS), all other parts of the specification are fully covered.
Projects that use RPostgreSQL or RMySQL can continue to do so, or switch to the new backends at their own pace (which likely requires some changes to the code). For new projects I recommend RPostgres or RMariaDB to take advantage of the thorougly tested codebases and of the consistency across backends.
Consistent access of tables in database schemas was planned for the “Improving DBI” project already, but I have implemented it only recently. It felt safer to see how the interface works on three backends, as opposed to implementing it for just RSQLite and then perhaps having to adapt it.
Id() function constructs identifiers. All arguments must be
named, yet DBI doesn’t specify the argument names, because DBMS have
an inconsistent notion of namespaces. The objects returned by
“dumb”, they gain meaning only when used in methods such as
For listing database objects in schemas, the new
generic can be used. It returns a data frame that contains identifiers
(like those created by the
Id() function) and a flag that indicates if
the identifier is complete (i.e., pointing to a table or view) or a
prefix. Incomplete identifiers can be passed to
which allows traversing the tree of database objects.
The following example assumes a schema
my_schema. A table named
my_table is created in this schema, objects are listed, and the table
is read again.
library(RPostgres) pg_conn <- dbConnect(Postgres()) table_name <- Id(schema = "my_schema", table = "my_table") table_name ## <Id> schema = my_schema, table = my_table data <- data.frame(a = 1:3, b = letters[1:3]) dbWriteTable(pg_conn, table_name, data) dbListObjects(pg_conn) ## table is_prefix ## 1 <Id> table = geography_columns FALSE ## 2 <Id> table = geometry_columns FALSE ## 3 <Id> table = spatial_ref_sys FALSE ## 4 <Id> table = raster_columns FALSE ## 5 <Id> table = raster_overviews FALSE ## 6 <Id> table = topology FALSE ## 7 <Id> table = layer FALSE ## 8 <Id> table = temp FALSE ## 9 <Id> schema = topology TRUE ## 10 <Id> schema = my_schema TRUE ## 11 <Id> schema = information_schema TRUE ## 12 <Id> schema = pg_catalog TRUE ## 13 <Id> schema = public TRUE dbListObjects( pg_conn, prefix = Id(schema = "my_schema") ) ## table is_prefix ## 1 <Id> schema = my_schema, table = my_table FALSE dbReadTable(pg_conn, table_name) ## a b ## 1 1 a ## 2 2 b ## 3 3 c
In addition to
dbRemoveTable() and the new
dbAppendTable() (see below) support an
Id() object as table
dbQuoteIdentifier() method converts these objects to SQL
strings. Some operations (e.g. checking if a table exists) require the
inverse, the new
dbUnquoteIdentifier() generic takes care of
converting valid SQL identifiers to (a list of)
quoted <- dbQuoteIdentifier(pg_conn, table_name) quoted ## <SQL> "my_schema"."my_table" dbUnquoteIdentifier(pg_conn, quoted) ## [] ## <Id> schema = my_schema, table = my_table
The new methods work consistently across backends, only RSQLite is currently restricted to the default schema. (Schemas in RSQLite are created by attaching another database, this use case seemed rather exotic but can be supported with the new infrastructure.)
When working on the database backends, it has become apparent that quoting strings and identifiers isn’t quite enough. Now there is a way to quote arbitrary values, i.e. convert them to a string that can be pasted into an SQL query:
library(RSQLite) sqlite_conn <- dbConnect(SQLite()) library(RMariaDB) mariadb_conn <- dbConnect(MariaDB(), dbname = "test") dbQuoteLiteral(sqlite_conn, 1.5) ## <SQL> 1.5 dbQuoteLiteral(mariadb_conn, 1.5) ## <SQL> 1.5 dbQuoteLiteral(pg_conn, 1.5) ## <SQL> 1.5::float8 dbQuoteLiteral(mariadb_conn, Sys.time()) ## <SQL> '20180501204025' dbQuoteLiteral(pg_conn, Sys.time()) ## <SQL> '2018-05-01 22:40:25'::timestamp
The default implementation works for ANSI SQL compliant DBMS, the method
for RPostgres takes advantage of the
:: casting operator as seen in
DBI supports storing data frames as tables in the database via
dbWriteTable(). This operation consists of multiple steps:
overwrite = TRUE, removing the table
To reduce complexity and allow for more options without cluttering the
argument list of
dbWriteTable(), DBI now provides generics for the
dbRemoveTable() generic has been extended with
fail_if_missing arguments. Setting
temporary = TRUE makes sure that only temporaries are removed. By
default, trying to remove a table that doesn’t exist fails, setting
fail_if_missing = FALSE changes this behavior to a silent success.
dbCreateTable() generic accepts a data frame or a
character vector of DBMS data types and creates a table in the
database. It builds upon the existing
sqlCreateTable() generic and
also supports the
temporary argument. If a table by that name
already exists, an error is raised.
dbAppendTable() generic uses a prepared statement (created
sqlAppendTableTemplate()) to efficiently insert rows into the
database. This avoids the internal overhead of converting values to
The following example shows the creation and population of a table with the new methods.
table_name ## <Id> schema = my_schema, table = my_table dbRemoveTable(pg_conn, table_name, fail_if_missing = FALSE) dbCreateTable(pg_conn, table_name, c(a = "int8", b = "float8")) dbAppendTable(pg_conn, table_name, data.frame(a = 1:3, b = 1:3)) ##  3 str(dbReadTable(pg_conn, table_name)) ## 'data.frame': 3 obs. of 2 variables: ## $ a:integer64 1 2 3 ## $ b: num 1 2 3
dbWriteTable() methods in the three backends have been adapted to
use the new methods.
As seen in the previous example, 64-bit integers can be read from the database. The three backends RSQLite, RPostgres and RMariaDB now also support writing 64-bit integers via the bit64 package:
data <- data.frame(a = bit64::as.integer64(4:6), b = 4:6) dbAppendTable(pg_conn, table_name, data) ##  3 str(dbReadTable(pg_conn, table_name)) ## 'data.frame': 6 obs. of 2 variables: ## $ a:integer64 1 2 3 4 5 6 ## $ b: num 1 2 3 4 5 6
Because R still lacks support for native 64-bit integers, the bit64
package feels like the best compromise: the returned values can be
computed on, or coerced to
numeric or even
depending on the application. In some cases, it may be useful to always
coerce. This is where the new
bigint argument to
pg_conn_int <- dbConnect(Postgres(), bigint = "integer") str(dbReadTable(pg_conn_int, table_name)) ## 'data.frame': 6 obs. of 2 variables: ## $ a: int 1 2 3 4 5 6 ## $ b: num 1 2 3 4 5 6 pg_conn_num <- dbConnect(Postgres(), bigint = "numeric") str(dbReadTable(pg_conn_num, table_name)) ## 'data.frame': 6 obs. of 2 variables: ## $ a: num 1 2 3 4 5 6 ## $ b: num 1 2 3 4 5 6 pg_conn_chr <- dbConnect(Postgres(), bigint = "character") str(dbReadTable(pg_conn_chr, table_name)) ## 'data.frame': 6 obs. of 2 variables: ## $ a: chr "1" "2" "3" "4" ... ## $ b: num 1 2 3 4 5 6
bigint argument works consistently across the three backends
RSQLite, RPostgres and RMariaDB, the DBI specification contains a
test for and a description of the requirements.
PostgreSQL has support for user-defined data types, this is used e.g. by PostGIS to store spatial data. Before, user-defined data types were returned as character values, with a warning. Thanks to a contribution by Etienne B. Racine:
dbCreateTable( pg_conn, "geom_test", c(id = "int4", geom = "geometry(Point, 4326)") ) data <- data.frame( id = 1, geom = "SRID=4326;POINT(-71.060316 48.432044)", stringsAsFactors = FALSE ) dbAppendTable(pg_conn, "geom_test", data) ##  1 str(dbReadTable(pg_conn, "geom_test")) ## 'data.frame': 1 obs. of 2 variables: ## $ id : int 1 ## $ geom:Class 'pq_geometry' chr "0101000020E61000003CDBA337DCC351C06D37C1374D374840" res <- dbSendQuery(pg_conn, "SELECT * FROM geom_test") dbColumnInfo(res) ## name type .oid .known .typname ## 1 id integer 23 TRUE int4 ## 2 geom character 101529 FALSE geometry dbClearResult(res)
Special support for geometry columns is currently available only in RPostgres.
The specification has been extended to disallow duplicate, empty or
column names. The deduplication used by our three backends is similar to
that used by
tibble::set_tidy_names(), but the DBI specification does
not require any particular deduplication mechanism. Syntactic names
aren’t required either:
dbGetQuery(sqlite_conn, "SELECT 1, 2, 3") ## 1 2 3 ## 1 1 2 3 dbGetQuery(sqlite_conn, "SELECT 1 AS a, 2 AS a, 3 AS `a..2`") ## a a..2 a..3 ## 1 1 2 3 dbGetQuery(mariadb_conn, "SELECT 1, 2, 3") ## 1 2 3 ## 1 1 2 3 dbGetQuery(mariadb_conn, "SELECT 1 AS a, 2 AS a, 3 AS `a..2`") ## a a..2 a..3 ## 1 1 2 3 dbGetQuery(pg_conn, "SELECT 1, 2, 3") ## ?column? ?column?..2 ?column?..3 ## 1 1 2 3 dbGetQuery(pg_conn, 'SELECT 1 AS a, 2 AS a, 3 AS "a..2"') ## a a..2 a..3 ## 1 1 2 3
Two little helper generics have been added.
dbIsReadOnly() generic (contributed by Anh Le) should return
TRUE for a read-only connection. This is not part of the specification
dbCanConnect() tests a set of connection parameters. The default
implementation simply connects and then disconnects upon success. For
DBMS that can provide more efficient methods of checking connectivity, a
lighter-weight implementation of this method may give a better
None of the three backends currently provide specialized implementations for these generics.
I have made some efforts to extract common C++ classes for assembling
data frames and prepare them for reuse. The C++ source code for the
three backends contains files prefixed with
Db, these are almost
identical across the backends. The planned packaging into the RKazam
package had to yield to higher-priority features described above.
The situation in the R code is similar: I have found myself copy-pasting code from one backend into another because I didn’t feel it’s ready (or standardized enough) to be included in the DBI package.
For both use cases, a code reuse strategy based on copying/updating template files or reconciling files may be more robust than the traditional importing mechanisms offered by R.
The upcoming CRAN release of DBI, DBItest and the three backends RSQLite, RMariaDB and RPostgres are an important milestone. Stability is important when more and more users and projects use the new backends. Nevertheless, I see quite a few potential improvements that so far were out of scope of the “Improving DBI” and “Establishing DBI” projects:
Support running the test suite locally, to validate adherence to DBI for a particular installation.
Consistent fast data import.
Consistent query placeholders (currently
$1 for RPostgres and
? for many other backends).
Support for arbitrary data types via hooks.
Assistance with installation problems on specific architectures, or connectivity problems with certain databases, or other specific issues.
Rework the internal architecture of DBItest to simplify locating test failures.
Improve the https://r-dbi.org website.
I have submitted another proposal to the R Consortium, hoping to receive support with these and other issues.
I’d like to thank the R Consortium for their generous financial support. Many thanks to the numerous contributors who helped make the past two projects a success.
This post appeared previously on https://r-dbi.org.
Kirill MüllerSetting up a load-balanced Jitsi Meet instance
Patrick SchratzDevOps Expert (f/m/d, 60-100%)
cynkra teamMaintaining multiple identities with Git
Kirill MüllerRelational data models in R
Angel D'az, Kirill Müllertempdisagg: converting quarterly time series to daily
Christoph Saxtsbox 0.2: supporting additional time series classes
Christoph SaxDevOps System Engineer (40-60%)
cynkra teamIntroducing dm: easy juggling of tables and relations
Balthasar Sagertsbox 0.1: class-agnostic time series
Christoph SaxData Scientist/Engineer (40-100%)
cynkra teamTime series of the world, unite!
Christoph SaxDone “Establishing DBI”!?